Open Frame Monitors - MDM PLUS series: The ultimate series of monitor-chassis for the coin-op and gaming industry

 

Simple to Use, due to the customised on-screen-menu. Delivers high quality SVGA pictures with exceptional clarity and colour reproduction applying a variety of creative innovations…

 

The MDM Plus series monitor-chassis has a wide range of features starting from the design for non-stop operation, use of the latest Colour Display Tubes 14” up to 32” Widescreen (16:9) Pure Flat Dual & Dynamic Focus, Customised & Friendly On-Screen-Menu, RGB cut-off adjustments, Screen Blanking Mode, Wired Remote Control and other technical characteristics valuable in a variety of applications.  Yet, for all its sophistication, MDM Plus represents exceptional value for manufacturers looking for high-end performance from an affordable monitor.

 



 

Mod. MDM Plus Vertical 28" 16:9 Series Dynamic Focus*

Mod. MDM Plus 28"-32" 16:9 Series Dynamic Focus (Horizontal)

  *MDM Plus Vertical  28"-32" 16:9 is the customised version of MDM Plus 28" 16:9 for vertical use of the CRT, including vertical on-screen-menu. All other specifications are the same for both Vertical and Horizontal Edition.

MDM Plus series

TECHNICAL CHARACTERISTICS

PICTURE TUBE:

Philips W66ERF032X044, dot pitch 0.7mm, Dual focus
LGPhilips W66ERF041X044, Dual focus
LGPhilips W66ERF042X044 (Pure Flat), Dual focus
Philips W76ESF031X44, dot pitch: 0.7mm, Dual focus

HOR. RESOLUTION:

1024X768 (interlaced)
856x480 23:13
848x480 16:9

SIGNAL INPUT:

RGB 0.7V pp - 75Ω
15 PIN Sub-D Connector

HORIZONTAL FREQUENCY:

30~40 KHz Auto

VERTICAL FREQUENCY:

50~120Hz Auto

VIDEO AMPLIFIER:

Linear

VIDEO BANDWIDTH:

50MHz ±3dB

VIDEO MODES COMPATIBLE:

VGA, XVGA, SVGA

HIGH VOLTAGE:

26 kV

MAINS VOLTAGE:

100VAC ~ 260VAC Full Range

POWER CONSUMPTION:

100 Watt Max.

CONTROLS:

Flat cable for remote control.
Brightness, contrast, vertical size, vertical Centering, vertical shift, vertical linearity, horizontal phase, horizontal size, pincushion, trapezium, parallelogram, R-G-B cut-off.

DEGAUSS:

Automatic

OPERATING TEMPERATURE:

From 0°C to +55°C
Humidity 10-95%

STORAGE TEMPERATURE:

-40°C to +65°C
Humidity 5-95%


SAFETY ISSUE: MDM PLUS monitor-chassis series are manufactured in compliance with EU directives, applying the following standards:  EN 6100-4-2, EN 6100-4-4, EN 6100-4-5, EN 6100-4-3, EN 6100-4-6, EN 6100-4-11, EN 6100-3-2, EN 6100-3-3, EN 55022, EN 60065

APPROVAL: CE Class B Approved

 

         FEATURES

  • Use of the new generation of CRTs (WideScreen, Pure Flat etc.)
  • Digital Multisync - Dynamic Focus
  • Non-stop operation. Designed to work on a 24-hour basis
  • Standalone device, not necessarily supported by metallic base of tube. Its own plastic base.
  • EPOX printed circuit
  • On Screen Display, Easy Adjustments.
  • CE certified Class B

APPLICATIONS

  • Gaming & Gambling machines
  • Electronic kiosks
  • Industrial Applications

 

Mod. MDM Plus 21"-25"-28"-33" SVGA

TECHNICAL CHARACTERISTICS

SIGNAL INPUT:

RGB 0.7V pp - 75Ω
15 PIN Sub-D Connector

SYNC INPUT:

TTL, vert. and horiz. Separated, positive or negative

HORIZONTAL FREQUENCY:

30~40 KHz Auto

VERTICAL FREQUENCY:

50~120Hz Auto

VIDEO BANDWIDTH:

100mHz

VIDEO MODES COMPATIBLE:

VGA, XVGA, SVGA

HOR. RESOLUTION:

640X480 800X600

NON INTERLACE:

YES

HIGH VOLTAGE:

26 kV

MAINS VOLTAGE:

90VAC ~ 260VAC Full Range

POWER CONSUMPTION:

75 Watt Max.

CONTROLS:

On Screen Display via programmable microcontroller.
Flat cable for remote control.
Brightness, contrast, vertical size, vertical Centering, vertical shift, vertical linearity, horizontal phase, horizontal size, pincushion, trapezium, parallelogram.

DEGAUSS:

Automatic

OPERATING TEMPERATURE:

From 0°C to +55°C
Humidity 10-95%

STORAGE TEMPERATURE:

-40°C to +65°C
Humidity 5-95%


SAFETY ISSUE: MDM Plus monitor-chassis series are manufactured in compliance with EU 73/23EU, 93/68/EU and 89/336/EU for electromagnetic compatibility directives, applying the following standards:

EN6100-4-2, EN6100-4-4, EN6100-4-5, EN6100-4-3, EN6100-4-6, EN6100-4-11, EN6100-3-2, EN6100-3-3, EN5502, EN60065

APPROVAL: CE Class B Approved

 

         FEATURES

  • Non-stop operation. Designed to work on 24hour basis
  • Digital technology, microprocessor & programmable micro controller.
  • Individual device, not necessary standing to metallic base of tube. Its own plastic base.
  • EPOX printed circuit
  • On Screen Display, Easy Adjustments.
  • Variety of tube sizes.
  • CE certified Class B

APPLICATIONS

  • Amusement machines
  • Information kiosks
  • Gaming & Gambling machines
  • Industrial Applications

 

 

RECOMMENDED TUBES

21"

25"

28"

33"

Philips A51EHE175X50

LG-Philips A59EAK552X11

Videocolor A66EDN43X12-3-4-Y

Videocolor A79ECU13X61

Philips A51EHS211X36

A59EAK552X44

LG-Philips A66EAK552X11

Philips A80EFF002X43

 

A59EAK071X44

LG-Philips A66EAK552X44

 

 

 

LG-Philips A66EAKO71X44

 

 

Mod. MDM Plus 17-19" SVGA Digital Multisync Dynamic Focus

TECHNICAL CHARACTERISTICS

C.R.T.:

19" LG M46QCG913X01-U Dual Focus, dot pitch 0.26 mm
19" LG M46QEF903X PURE-FLAT Dual Focus, dot pitch 0.25 mm
19" SAMSUNG M46QCE261X112 Dual Focus, dot pitch 0.26 mm

17" LG M41LFQ803X01 Dual Focus, dot pitch 0.27 mm
17" LG M41QEE903 PURE-FLAT Dual Focus, dot pitch 0.25 mm

 

SIGNAL INPUT:

RGB 0.7V pp - 75Ω
15 PIN Sub-D Connector

SYNC INPUT:

TTL, vert. and horiz. Separated, positive or negative

HORIZONTAL FREQUENCY:

30~56 KHz Auto

VERTICAL FREQUENCY:

50~120Hz Auto

FOCUS:

Double & Dynamic

VIDEO BANDWIDTH:

100mHz

VIDEO MODES COMPATIBLE:

VGA, XVGA, SVGA

HOR. RESOLUTION:

640X480 800X600 1024X768

NON INTERLACE:

YES

HIGH VOLTAGE:

26 kV

MAINS VOLTAGE:

90VAC ~ 260VAC Full Range

POWER CONSUMPTION:

75 Watt Max.

CONTROLS:

On Screen Display via programmable microcontroller.
Flat cable for remote control.
Brightness, contrast, vertical size, vertical Centering, vertical shift, vertical linearity, horizontal phase, horizontal size, pincushion, trapezium, parallelogram.

DEGAUSS:

Automatic

OPERATING TEMPERATURE:

From 0°C to +55°C
Humidity 10-95%

STORAGE TEMPERATURE:

-40°C to +65°C
Humidity 5-95%

SAFETY ISSUE: MDM Plus monitor-chassis series are manufactured in compliance with EU 73/23EU, 93/68/EU and 89/336/EU for electromagnetic compatibility directives, applying the following standards:
EN6100-4-2, EN6100-4-4, EN6100-4-5, EN6100-4-3, EN6100-4-6, EN6100-4-11, EN6100-3-2, EN6100-3-3, EN5502, EN60065

APPROVAL: CE Class B Approved.

         FEATURES

·         Use of the new generation of Colour Display Tubes. Dot pitch 0.26mm

  • Digital Multisync - Dual & Dynamic Focus
  • Non-stop operation. Designed to work on a 24-hour basis
  • Standalone device, not necessarily supported by metallic base of tube. Its own plastic base.
  • EPOX printed circuit
  • On Screen Display, Easy Adjustments.
  • CE certified Class B

APPLICATIONS

·         Amusement machines

  • Information kiosks
  • Gaming & Gambling machines
  • Industrial Applications

 

Mod. MDM Plus 14" SVGA Digital Multisync

This chassis is built to work with 14" H.R. tubes with horizontal yoke. Coil inductance: From 0.290mH to 0.700 mH

TECHNICAL CHARACTERISTICS

C.R.T.:

Philips M34EDC13X37, dot pitch 0.28 mm

SIGNAL INPUT:

RGB 0.7V pp - 75Ω
15 PIN Sub-D Connector

SYNC INPUT:

TTL, vert. and horiz. Separated, positive or negative

HORIZONTAL FREQUENCY:

30~56 KHz Auto

VERTICAL FREQUENCY:

50~120Hz Auto

VIDEO BANDWIDTH:

100mHz

VIDEO MODES COMPATIBLE:

VGA, XVGA, SVGA

HOR. RESOLUTION:

640X480 800X600 1024X768

NON INTERLACE:

YES

HIGH VOLTAGE:

29 kV

MAINS VOLTAGE:

90VAC ~ 260VAC Full Range

POWER CONSUMPTION:

75 Watt Max.

CONTROLS:

On Screen Display via programmable microcontroller.
Flat cable for remote control.
Brightness, contrast, vertical size, vertical Centering, vertical shift, vertical linearity, horizontal phase, horizontal size, pincushion, trapezium, parallelogram.

DEGAUSS:

Automatic

OPERATING TEMPERATURE:

From 0°C to +55°C
Humidity 10-95%

STORAGE TEMPERATURE:

-40°C to +65°C
Humidity 5-95%

SAFETY ISSUE: MDM Plus monitor-chassis series are manufactured in compliance with EU 73/23EU, 93/68/EU and 89/336/EU for electromagnetic compatibility directives, applying the following standards:
EN6100-4-2, EN6100-4-4, EN6100-4-5, EN6100-4-3, EN6100-4-6, EN6100-4-11, EN6100-3-2, EN6100-3-3, EN5502, EN60065

APPROVAL: CE Class B Approved

FEATURES

·         Use of the new generation of Colour Display Tubes. Dot pitch from 0.26mm to 0.28 mm

  • Digital Technology: Multisync & Autoscan
  • Non-stop operation. Designed to work on a 24-hour basis
  • Standalone device, not necessarily supported by metallic base of tube. Its own plastic base.
  • EPOX printed circuit
  • On Screen Display, Easy Adjustments.
  • CE certified Class B

APPLICATIONS

·         Amusement machines

  • Information kiosks
  • Gaming & Gambling machines
  • Industrial Applications

 

Contact Us

EΛΛHNIKA

Download Brochures in PDF format

English

Italiano